Panasonic FZ-G1 Series - Connecting to a Wireless WAN Network

7. Pull the card all the way out.
8. Close the nanoSIM card slot cover(F), attach it and tighten the screw (E) firmly.
9. Insert the battery pack and connect the AC adaptor.
Connect/Disconnect to a network
Connecting to a network
If the APN setting iscompleted automatically after inserting the nanoSIM card, Internet connection willbe possible.
In such cases, the following settings are not necessary.
Adding an APN
If Internet connection via wireless WAN is not possible, perform the following to add an APN.
1.
Touch (Start) - (Settings) - [Network & Internet].
2. Touch [Cellular].
- 52 -