Panasonic FZ-G1 Series - Peripheral Configuration in Setup Utility; Serial Port and Barcode Reader Settings; Wireless and GPS Configuration

Peripheral Configuration
Serial Port Settings
The submenu appearswhen this item is selected.
Used to configure the Barcode Reader.
Enter the sub-menu
Sub-menu (Serial Port Settings)
Serial Port
Only for model with Serial Port.
Disabled
Enabled
Auto
I/O IRQ
Can be changed only when [Serial Port] is set to [Enabled].
3F8/IRQ4
2F8/IRQ3
Barcode Reader
Only for model with Barcode Reader.
Disabled
Enabled
Auto
I/O IRQ
Can be changed only when [Serial Port] is set to [Enabled].
3F8/IRQ4
2F8/IRQ3
Wireless Configuration
The sub-menu appears when this item is selected.
Enter the sub-menu.
LAN
Only for model with LAN
Disabled
Enabled
Power On by LAN
Can be changed only when LAN isset to [Enabled].
Disabled
Enabled
Sub-menu (Wireless Configuration)
Wireless LAN
Only for model with wireless LAN
Disabled
Enabled
Wireless WAN
Only for model with wireless WAN
Disabled
Enabled
Bluetooth
Only for model with Bluetooth
Disabled
Enabled
GPS
Only for model with dedicated GPS
Disabled
Enabled
microSD Slot Disabled
Enabled
Extension Port Disabled
Enabled
Smart Card
Only for model with Smart Card slot
Disabled
Enabled
- 71 -