Panasonic FZ-G1 Series - Boot Menu and UEFI Settings; Configuring Boot Mode and UEFI Priorities; Changing the Boot Order

ContactlessSmart Card Reader
Only for model with Contactless Smart Card Reader
Disabled
Enabled
UHF-RFID
Only for model with UHF-RFID
Disabled
Enabled
Magnetic Stripe Card Reader
Only for model with Magnetic Stripe Card Reader
Disabled
Enabled
USB Port Disabled
Enabled
SuperSpeed USB Disabled
Enabled
Cradle USB Port Disabled
Enabled
SuperSpeed USB Disabled
Enabled
Legacy USB Support Disabled
Enabled
Camera Configuration
Camera (Front) Disabled
Enabled
Camera (Rear) Disabled
Enabled
Thermal Camera
Only for model with Thermography Camera
Disabled
Enabled
Boot Menu
Underlined items are the factory presets.
Boot Mode
If the startup from USB devices isnot possible, set [Compatible] and retry.
However, setting [Compatible] will require longer time to display the Windows
boot screen than setting [Normal].
Normal
Compatible
UEFI Priorities
The sub-menu appears when this item is selected.
Enter the sub-menu.
UEFI Priorities
Boot Option #1 Windows Boot Manager
Windows Recovery Environment
Recovery Partition
Disabled
- 72 -