Panasonic FZ-G1 Series - Page 90

When creating a barcode configuration file
1. Touch [File] - [Save as].
2. Save the barcode configuration file.
When creating and reflecting the barcode configuration file
1. Touch [Tool] - [ApplyConfiguration].
2. Save the barcode configuration file.
The setting of the barcode configuration file willbe reflected.
If you want to reflect the barcode configuration file you created
1. Touch [File] - [Open], open the barcode configuration file.
2. Touch [Tool] - [ApplyConfiguration].
6. Touch [File] - [Exit].
At the confirmation message, select [Yes].
Application of INI file
1.
Create the Barcode Configuration File (*.INI File). ( When creating a barcode configuration file)
2. Barcode configuration file that you created by dragging and dropping the Barcode Configuration Utility (.exe), can be reflected in the
barcode reader module.
The execution file isstored below:
<For 32-bit OS>
C:\Program files\Panasonic\BCR2D_A_Set\BCR2D_A_Set.exe
<For 64-bit OS>
C:\Program Files (x86)\Panasonic\BCR2D_A_Set\BCR2D_A_Set.exe
With this method, you can reuse the INI file or make settings for another PC.
- 90 -