Panasonic HC-X1000 - Connecting by Entering an Ssid and Password

- 126 -
1 Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fi
function.
2 Select the menu.
3 Touch [Change connection type].
4 Touch [QR code].
≥ QR code is displayed on the screen of this unit.
5 Start up the smartphone application “Image App”.
6 On the smartphone, select [QR code], and scan the QR code displayed on the
screen of this unit.
≥ When using an Android device, the smartphone and this unit are connected directly, allowing you
to use remote operations. (l 115)
≥ When using an iOS device, perform the following operations:
1 Select the option that allows you to install the app on the profile screen of the “Image App”, and
follow the on-screen instructions to complete the installation.
2 Press the home button to close the displayed screen.
3 After selecting the network name (SSID) of this unit from the Wi-Fi setup of the smartphone,
start up the “Image App”.
≥ When the QR code cannot be scanned, refer to “Connecting by entering an SSID and Password”.
1 Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fi
function.
2 Select the menu.
3 On the smartphone, select the SSID displayed on this unit from the Wi-Fi
setup menu.
4 Enter the Password displayed on this unit’s screen on the smartphone.
Confirming that the Wi-Fi connection is complete
j is displayed on the screen
Connecting with QR code
: [Wi-Fi Setup] # [Direct Connection]
Confirming that the Wi-Fi connection is complete
j is displayed on the screen
Connecting by entering an SSID and Password
: [Wi-Fi Setup] # [Direct Connection]
MENU
MENU