Panasonic HC-X1000 - Attaching the Tripod

- 13 -
2 Attach an external microphone
(optional) to the microphone holder, and
tighten the microphone holder screws.
3 Connect the external microphone to the
AUDIO INPUT1 terminal (XLR 3 pin).
≥ When wiring the microphone cable, use the cable
clamper of this unit.
∫ Attaching the INPUT terminal cap
Attach the INPUT terminal cap while the audio input terminals 1, 2 (XLR 3 pin) is not used.
∫ Attaching the tripod
≥ There are tripod receptacle that are compatible with
1/4-20UNC screws.
≥ Attaching a tripod with a screw length of 5.5 mm or
more may damage the unit.




A Microphone cable clamper
B Microphone holder screws
C External microphone (optional)
D AUDIO INPUT1 terminal
(XLR 3 pin)

E INPUT terminal cap

F Tripod receptacle