Panasonic HC-X2 - Attaching the External Microphone

Preparations before recording
DVQX2253 (ENG)
17
ENGLISH
2
Attach the eye cup so that the ridge inside it is aligned
with the groove on the eye cup mount.
Push the eye cup in until it reaches the mounting mark.
Attaching the external microphone
1
Open the microphone holder.
Open buckle (1), and detach fitting (2) from hook (3).
2
Attach the microphone holder
to the microphone holder
mounting section.
(A) Microphone holder
(B) Microphone holder mounting screws
0 Attach using a commercially-available screwdriver.
0 There will be some rubbing noises with the rubber when screwing in the
microphone holder mounting screws, but please ensure they are done up
tightly.
3
Attach the external microphone to the
microphone holder, then close the buckle
to secure the external microphone.
Attach the fitting to the hook and close the buckle in the
direction indicated by the arrow.
(1) (2) (3)
(A) (B)
HC-X20_X2PP-DVQX2253_eng.book 17 ページ ２０２２年７月２１日 木曜日 午前１１時４４分