Panasonic HC-X2 - About the Battery Charger

Preparations before recording
DVQX2253 (ENG)
19
ENGLISH
About the Battery Charger
This unit can charge two battery packs simultaneously and supports quick charging
batteries.
(A) CHARGE indicators <CHARGE1/CHARGE2>
Indicate the charge status as follows.

Charging the battery
1
Connect the DC plug of the AC adaptor to the DC IN 12 V
connector of battery charger.
2
Connect the AC mains lead to the AC adaptor.
0 Perform step (2) first, and then step (3). Insert the AC mains lead all the way
in until it stops.
3
Insert the battery into the battery charger.
0 Slide the battery horizontally into the battery charger along the “ ” mark.
0 The corresponding CHARGE indicator lights and charging starts.
0 The CHARGE indicator turns off when charging is complete. Slide the battery
to remove it.
Indicator Charge status
Lit green Quick charging is in progress.
Lit orange Normal charging is in progress.
Blinking orange
Charging has stopped due to
an error.
Off
Charging is complete, or a
battery pack is not inserted.
(A)
(1)
(4)
(2)
(3)
HC-X20_X2PP-DVQX2253_eng.book 19 ページ ２０２２年７月２１日 木曜日 午前１１時４４分