Overview – Description of Parts
19
(41) LCD monitor (ÎUsing the LCD monitor: 53)
(42) Lens cover opening and closing lever (ÎOpening and closing the lens cover: 37)
Opens/closes the lens cover.
(43) Eye sensor
Screen is displayed on the viewfinder when an eye is brought close.
(44) Viewfinder (ÎUsing the viewfinder: 55)
(45) Eye cup (ÎAttaching the eye cup: 38)
(46) Battery release button (ÎAttaching and removing the battery: 33)
Used when removing the battery from the main unit.
(47) Battery mounting section (ÎAttaching and removing the battery: 33)
Attaches a battery.
(48) USB terminal (ÎConnection function via the USB terminal: 263, Network connection: 268)
Connect to a computer with the USB cable to transfer data.
(For the )
When connecting the camera to iPhone/iPad or Android device using USB cable, connection to the network is possible
using USB tethering.
(For the )
When the unit and a USB ethernet adaptor (commercially available) are connected, connection to the network is possible
via a LAN terminal.
(49) <HDMI> terminal (ÎTV/monitor: 262)
A terminal to output video signal by connecting a monitor, etc.
(50) (For the )
<LAN> terminal (ÎPreparing for connection: 270)
Connects the LAN cable.
(51) Tripod mounting holes (ÎAttaching a tripod: 40)
Attach the tripod. (bottom)
• Mounting hole size (screw length 5.5 mm (0.22 q) or shorter)
– 1/4-20 UNC
– 3/8-16 UNC
• Attaching a tripod with a screw length of 5.5 mm (0.22 q) or more may damage the unit.
(52) Diopter adjuster lever (ÎUsing the viewfinder: 55)
Adjusts the diopter scale so that the viewfinder screen can be viewed clearly.
(41)
(43) (44) (45)(42)
(47)
(46)
(52)
(51)
(48)
(49)
(48)
(49)
(50)
X20
X2
To Next Page
Loading...
