Panasonic HC-X2 - Screen display during shooting

Screen status display – Screen display during shooting
245
Screen display during shooting
* Displayed when using .
1 Time code
Each time you press the <COUNTER> button, the next display is shown or it switches to no display.
[TCG ¢¢: ¢¢: ¢¢: ¢¢]:
Displays the time code. [TCR ¢¢:¢¢:¢¢:¢¢] will be displayed during playback.
• (For the )
[TCG] is displayed with black and white inverted during the slave lock into the external input time code.
[UBG ¢¢ ¢¢ ¢¢ ¢¢]:
Displays the user bits. [UBR ¢¢ ¢¢ ¢¢ ¢¢] will be displayed during playback.
[CLIP ¢: ¢¢: ¢¢: ¢¢]:
Displays the counter value of each clip. This is displayed when the [RECORDING] menu ¨ [REC COUNTER] is set to
[CLIP]. Displays the counter value of the clip being played back during playback.
[¢:¢¢:¢¢:¢¢]:
Displays the cumulative counter value from the reset position. This is displayed when the [RECORDING] menu ¨ [REC
COUNTER] ¨ [TOTAL] is set.
2 Frame rate
[¢¢fps]:
Frame rate is displayed when set to the [SCENE FILE] menu ¨ [VFR] ¨ [ON].
[S.SLOW120]:
Displayed when set to the [SYSTEM] menu ¨ [SUPER SLOW] ¨ [ON] and the [SYSTEM] menu ¨ [FREQUENCY] ¨
[59.94Hz].
[S.SLOW100]:
Displayed when set to the [SYSTEM] menu ¨ [SUPER SLOW] ¨ [ON] and the [SYSTEM] menu ¨ [FREQUENCY] ¨
[50.00Hz].
(No display):
It is not displayed when the [SCENE FILE] menu ¨ [VFR] and the [SYSTEM] menu ¨ [SUPER SLOW] are set to [OFF].
3 <AUTO/MANU> switch
Displayed when the <AUTO/MANU> switch is set to <AUTO>.
4 Message display area for stop of cooling fan
Displays a message when the cooling fan has stopped.
TCG 1 2 : 3 4 : 5 6 : 2 8
2160-59.94p
MOV HEVC 200M
A001C001
A 3200K
IP REMOTE
24dB ND:CLR 1/8000 F5.6
+1.0EVDEC 3 1 2 0 2 2 1 0 : 4 5 : 3 0
iZ50
MF99
D2x
IR
70%
HDMI INTRVLH.SENS.
ND1/16
FLUO
999min 999min
S.SLOW120
FBC
RELAY
DRS
STD
[ + ]
CH1
CH2
ICONS
VOLUME [ - ]
123 5 6 7 8 5 6 9 10 11 12
16
17 18 19 20 21
22 23 24 25
39
27
29
31
32
42
44
45
28
26
30
40
41
43
31
46
47
33
34
35
36
37
38
4 13 14 15