Preparations before recording – Tally lamps
57
Tally lamps
The front tally lamp and the rear tally lamp can be illuminated during the shooting.
1
Select the [OTHERS] menu ¨ [LED] ¨ [TALLY LED] ¨[FRONT]/[REAR]/[BOTH].
2
Select the [OTHERS] menu ¨ [LED] ¨ [REC TALLY] ¨[ON]
• The tally lamps will flash when the unit is in the following status.
– When the remaining recording capacity of the memory card or the remaining battery level is low (one time per second)
– When the memory card has no more space to record (4 times per second)
– When a warning such as a system error or a recording abnormality has occurred (4 times per second)
• The tally lamps will not illuminate or flash when the [OTHERS] menu ¨ [LED] ¨ [TALLY LED] ¨ [OFF] is set.
To Next Page
Loading...
