Panasonic HC-X20 - Page 275

Network Connection – Network settings
275
 For the
1
Select the [NETWORK] menu ¨ [DEVICE SEL] ¨ [USB-LAN].
2
In [NETWORK] menu ¨ [USB-LAN IPv4 SETTING] and [USB-LAN IPv6 SETTING], set
each item as required.
• For details about the setting items (ÎSetting items for [USB-LAN IPv4 SETTING], and [USB-LAN IPv6 SETTING] when
set to [USB-LAN]: 275)
3
Close the menu or return to the level of the [NETWORK] menu.
4
Configure the settings of the wired LAN on your device such as a computer.
For more information, refer to the operating instructions or help for the connection device.
Setting items for [USB-LAN IPv4 SETTING], and [USB-LAN IPv6 SETTING] when set to [USB-LAN]
[USB-LAN IPv4 SETTING]
[DHCP]
Setting the DHCP function
• [OFF]: Does not use DHCP.
• [CLIENT]: Acquires automatically with DHCP.
• [SERVER]: Enables the DHCP server function of the unit.
(Factory setting: [OFF])
[IP ADDRESS]
IP address of the unit
(Factory setting: [192.168.0.1])
[SUBNET MASK]
Subnet mask
(Factory setting: [255.255.255.0])
[DEFAULT GATEWAY]
Default gateway
(Factory setting: [192.168.0.254])
[PRIMARY DNS]
Primary DNS server setting
(Factory setting: [0.0.0.0])
[SECONDARY DNS]
Secondary DNS server setting
(Factory setting: [0.0.0.0])
[USB-LAN IPv6 SETTING]
[ENABLE/DISABLE]
IPv6 setting
• [ENABLE]: Uses IPv6.
• [DISABLE]: Does not use IPv6.
(Factory setting: [DISABLE])
[DHCP]
Setting the DHCP function
• [OFF]: Does not use DHCP.
• [CLIENT]: Acquires automatically with DHCP.
(Factory setting: [OFF])
[IP ADDRESS]
IP address of the unit
(Factory setting: [::])
[PREFIX LENGTH]
Prefix length settings of the subnet
(Factory setting: [64])
[DEFAULT GATEWAY]
Default gateway
(Factory setting: [::])
[PRIMARY DNS]
Primary DNS server
(Factory setting: [::])
[SECONDARY DNS]
Secondary DNS server
(Factory setting: [::])