Why does my Panasonic HC-X909 turn off automatically?
Your Panasonic Camcorder might be turning off automatically due to the VIERA Link feature if you turn off the TV with the TV remote. To prevent this, set the [VIERA Link] setting to [OFF] if you are not using VIERA Link. Also, if the unit is connected to a DVD burner and the USB Connection Cable is removed while copying or playing back images, it will turn off automatically.
What to do if the remaining battery indication is not displayed properly on my Panasonic HC-X909?
The remaining battery capacity indication is an approximation. If the remaining battery capacity indication is not displayed correctly, fully charge the battery, discharge it, and then charge it again.
Why doesn't the auto focus function work on my Panasonic HC-X909?
The auto focus function on your Panasonic Camcorder may not work because you are not in Intelligent Auto Mode, so switch to Intelligent Auto Mode. Alternatively, if you are trying to record a scene that is difficult to bring into focus in Auto Focus Mode, use the Manual Focus Mode to adjust the focus.
What to do if my Panasonic HC-X909 Camcorder displays “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
If your Panasonic Camcorder displays the error message, restart the unit by turning it off and then on again. If the message continues to appear even after restarting, repair is needed. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the unit by yourself.
Why does my Panasonic HC-X909 Camcorder arbitrarily stop recording?
Your Panasonic Camcorder may stop recording for several reasons: * Ensure you are using an SD card suitable for motion picture recording. * Format the SD card or built-in memory using the unit, as the recordable time may have shortened due to deterioration of data writing speed or repeated recording and deletion. * If [AGS] is set to [ON], record in the normal horizontal position or set [AGS] to [OFF].
What to do if my Panasonic HC-X909 Camcorder does not operate normally?
If your Panasonic Camcorder is not operating normally, remove the battery or AC adapter, wait about a minute, and then reconnect it. Wait another minute before turning the unit back on. If this doesn't restore normal operation, detach the power and consult the dealer from whom you purchased the unit.
Why does my Panasonic Camcorder battery run down so quickly?
There are several reasons why your Panasonic Camcorder's battery might be draining quickly. Ensure the battery is fully charged. Keep in mind that battery life is shorter in cold environments. Also, batteries have a limited lifespan. If the battery still drains quickly after a full charge, it likely needs replacing.
Why are the images squeezed horizontally when my Panasonic HC-X909 is connected to the TV?
If images are squeezed horizontally when your Panasonic Camcorder is connected to the TV, select the correct channel on your TV that matches the input used for the connection. Also, change the [TV ASPECT] setting on the camcorder to match the aspect ratio of your TV and change the setting of the unit depending on the cable connecting to the TV.
What to do if my Panasonic HC-X909 Camcorder is not detected by PC via USB?
If your Panasonic Camcorder is not detected by the PC when connected via USB, try the following: * Re-insert the SD card into the unit, then reconnect the supplied USB cable. * Try a different USB terminal on your PC. * Restart the PC and turn on the unit again before reconnecting the USB cable.
General| Sensor Type | MOS |
|---|---|
| Optical Zoom | 20x |
| Recording Media | SD/SDHC/SDXC Memory Card |
| Video Format | AVCHD, MP4 |
| Maximum Video Resolution | 1920 x 1080 |
| Audio Format | Dolby Digital 2ch |
| HDMI Output | Yes |
| Maximum Aperture | f/1.5 - f/3.6 |
| Image Stabilization | Optical |
| Viewfinder | Yes |
| Frame Rate | 60p, 60i |
| USB | USB 2.0 |
| Battery Type | Lithium-ion |
| LCD Screen Size | 3.5 inches |
To Next Page