Panasonic HC-X920P - Disassembly and Assembly Instructions; Detailed Disassembly Procedures

37
8.3. Disassembly Procedure for the
Unit
No. Item Fig Removal
1 Side Case-L Unit (Fig. D1) 2 Screws (A)
2 Screws (B)
(Fig. D2) 3 Screws (C)
2 Locking tabs
Side Case-L Unit
2SD OP P.C.B.
Cover Board Unit
(Fig. D3) FP3901 (Flex)
FP3902 (Flex)
FP3903 (Flex)
2 Screws (D)
1 Hooking part
Connector
SD OP P.C.B.
(Fig. D4) 4 Screws (E)
1 Screw (F)
1 Locking tab
Cover Board Unit
3 ESD P.C.B.
(HC-X920M only)
(Fig. D5) 1 Screw (G)
1 Hooking part
FP3201 (Flex)
ESD P.C.B.
4 Top Case Unit (Fig. D6) 3 Screws (H)
2 Screws (I)
1 Screw (J)
2 Locking tabs
SR Cover
1 Locking tab
Sensor Window
1 Screw (K)
1 Rib
(Fig. D7) P6752 (Connector)
1 Locking tab
FP851 (Flex)
1 Rib
Top Case Unit
5 Front Case Unit (Fig. D8) P7001 (Connector)
P7002 (Connector)
1 Screw (L)
1 Locking tab
FP6403 (Flex)
Front Case Unit
6 Lens Unit (Fig. D9) 1 Screw (M)
ESD Angle
2 Convexes
PS6011 (Connector)
FP6002 (Flex)
Lens Unit
7 Battery Catcher P.C.B.
HDMI FPC
Main P.C.B.
Flash P.C.B.
(Fig. D10) 4 Screws (N)
2 Screws (O)
Rear Frame
P6001 (Connector)
P6302 (Connector)
FP6004 (Flex)
(Fig. D11) Battery Catcher P.C.B.
Heat Radiation SheetA
2 Screws (P)
FP6402 (Flex)
HDMI FPC
3 Screws (Q)
2 Ribs
Main Heat Radiation Board
(Fig. D12) PP6006 (Connector)
1 Projection part
Main P.C.B.
2 Screws (R)
1 Projection part
Flash P.C.B.
8 Fan Motor (Fig. D13) 1 Screw (S)
Fan Frame
1 Locking tab
2 Ribs
Fan Damper
Fan Motor
9 LCD Panel Unit
Monitor P.C.B.
(Fig. D14) 1 Screw (T)
(Fig. D15) 1 Screw (U)
2 Screws (V)
6 Locking tabs
LCD Case (T) Unit
FP901 (Flex)
FP902 (Flex)
FP903 (Flex)
FP904 (Flex)
(Fig. D16) 3 Ribs
3 Hooking parts
LCD Frame
4 Locking tabs
LCD Panel Unit
(Fig. D17) 4 Locking tabs
2 Ribs
Monitor P.C.B.
Reflection Sheet
Light Guide Plate
Diffusion Sheet
Prism Sheet (B)
Prism Sheet (A)
LCD Holder
10 Front P.C.B. (Fig. D18) 1 Screw (W)
1 Screw (X)
FP6400 (Flex)
FP6402 (Flex)
Front P.C.B.
11 Barrier Motor Unit (Fig. D19) 1 Screw (Y)
Barrier Motor Unit
(Fig. D20) NOTE: (When Installing)
12 Flash
Barrier Case Unit
(Fig. D21) Lens Ornament
(Fig. D22) 4 Screws (Z)
3 Groove parts
(Fig. D23) Flash
Barrier Case Unit
No. Item Fig Removal