Panasonic HC-X920P - Measurements and Adjustments; Service Adjustment Procedure Execution

58
9.1.3. Adjustment Procedure
All adjustments except “Touch Panel Calibration” and “Factory Setting” performs using “14 Adjustment function for the service” in
service mode menu.
“Touch Panel Calibration” is performed using 16 of service mode menu and “Factory Setting” is performed using 1 of service mode
menu. Refer to “6 Service mode” and “10 Factory Setting”.
[Execute adjustment function for service]
1. Set the mode switch “Motion Picture Recording” mode.
2. While the power is turned OFF, keep pressing the “Power” button, “Zoom lever” to W side and “intelligent auto/Manual” button
for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
3. Touch the 3 times then touch the [14] of LCD.
4. Touch the [YES] of LCD.