25
VQT2D32
PICTURE
[QUALITY] (l 42)
[HI-SPEED BURST]
*1
(l 56)
[SELF TIMER] (l 57)
[FLASH] (l 57)
[FLASH LEVEL]
*1
(l 57)
[RED EYE]
*1
(l 58)
[SHTR SOUND] (l 58)
MEDIA SELECT
*2
When recording to the SD card, select [SD
CARD]. When recording to the built-in
memory, select [Built-in Memory].
SETUP
[DISPLAY]
The screen indications are selected as
shown in the illustration below.
[OFF] [ON]
[EXT. DISPLAY] (l 86)
[CLOCK SET] (l 28)
[SET WORLD TIME] (l 30)
[DATE/TIME] (l 28)
[DATE FORMAT] (l 29)
[ECONOMY]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without
any operation, this unit automatically turns
off to save battery life.
≥ The power save function will not activate
when:
jconnected to AC adaptor
jusing the USB cable for PC, DVD
burner, printer etc.
jPRE-REC is used
[QUICK POWER ON] (l 36)
[QUICK START] (l 36)
[REC LAMP]
The recording lamp lights up during
recording and flashes when the self-timer is
counting down. When this is set to [OFF], it
does not light during recording.
To Next Page
Loading...
