Panasonic KX-A405 - Unpacking and LED Indications

Unpacking
Unpack the box and check the items below:
Repeater (KX-A405) 1
AC Adaptor (PQLV219) 1
Screws 2
Washers 2
LED Indications
The
LED patterns and the corresponding status of the repeater in each mode are as follows. For details about
each mode, refer to "3 Registering the Repeater" or "4 Using the Repeater".
Mode Status
LED
STATUS RSSI/ID
— Power Off Off Off
De-registration Mode
Entering De-registration
mode (0–5 seconds
*1
)
Red Flashing
Off
Entering De-registration
mode (5–10 seconds
*1
)
Quick Red Flashing
De-registration complete
(after 10 seconds
*1
)
Red On
Registration Mode
(Easy/Manual)
Searching for devices Red Flashing Off
Operation Mode
Standby (signal is strong)
Green On
Green On
Standby (signal is weak) Amber On
Standby (out of range)
Red On
Red On
Talking (signal is strong)
Green Flashing
Green On
Talking (signal is weak) Amber On
Busy (signal is strong)
Quick Green Flashing
Green On
Busy (signal is weak) Amber On
Installation Manual 7
1 Overview