Page 6 of 9
Panasonic DT543/546 Set
Quick Reference Guide
CALL LOG - INCOMING
To call using the Incoming Call Log:
Press the MENU key
Use the up and down arrows of the navigator key to place the → beside “Incoming Call Log”
Press the ENTER key
Use the up and down arrows of the navigator key to place the → beside the caller you would like to dial
Lift handset or press SP-PHONE key for hands free
To store the caller into your station directory:
Press the MENU key
Use the up and down arrows of the navigator key to place the → beside “Incoming Call Log”
Press the ENTER key
Use the up and down arrows of the navigator key to place the → beside the caller you wish to store
Press the STORE key
Use the keypad to select each letter required for the name. You can also use the left and right arrows of
the navigator key to move the cursor. Press the CLEAR key to correct a single misdialed entry (Max. of 20
characters)
Press the ENTER key to save
Press the EXIT key to exit
CALL LOG - OUTGOING
To call using the Outgoing Call Log:
Press the MENU key
Use the up and down arrows of the navigator key to place the → beside “Outgoing Call Log”
Press the ENTER key
Use the up and down arrows of the navigator key to place the → beside the person you would like to dial
Lift handset or press SP-PHONE key for hands free
To store the number into your station directory:
Press the MENU key
Use the up and down arrows of the navigator key to place the → beside “Outgoing Call Log”
Press the ENTER key
Use the up and down arrows of the navigator key to place the → beside the person you wish to store
Press the STORE key
Use the keypad to select each letter required for the name. You can also use the left and right arrows of
the navigator key to move the cursor. Press the CLEAR key to correct a single misdialed entry (Max. of 20
characters)
Press the ENTER key to save
Press the EXIT key to exit
To Next Page
Loading...
