Panasonic KX-DT543 - Product Specifications

Page 5 of 9
Panasonic DT543/546 Set
Quick Reference Guide
CALL PICKUP
To pick up a call ringing at another extension:
 Lift handset or press SP-PHONE for hands free
 Dial * 4 1 plus the extension number of the ringing phone or dial * 4 0 plus the two-digit group number for
which the ringing phone belongs
PAGING
To page:
 Lift handset
 Press the DSS Key* preprogrammed as PAGE or press * 3 3 plus the two-digit paging group
 After the tone, voice your announcement
 Hang up or if you require a response please wait
To answer a page:
 Lift handset or press SP-PHONE for hands free
 Press * 4 3
 After the tone, you will be connected to the caller
ONE TOUCH KEY PROGRAMMING
To program a CO key / DSS key as a speed dial key:
 Do not lift the handset
 Press the PROGRAM key
 Press the key to be programmed (Important! DO NOT use preprogrammed outside line keys)
 Dial 1 for DSS key* or 2 for speed dial key
 If used as a DSS key* dial the extension number or if used as a one touch key dial 9 plus the external
number to be stored for speed dial
 Press the ENTER key to save
 Press the EXIT key to exit
Using One-Touch Keys: Simply press the preprogrammed DSS key*
PROGRAMMING CO KEYS
To program a CO key / DSS key for various functions:
 Do not lift the handset
 Press the PROGRAM key
 Press the key to be programmed (Important! DO NOT use preprogrammed outside line keys)
 Use the up and down arrows of the navigator key to display the operation you wish the key to perform
 Follow the prompts as required
 Press the EXIT key to exit