Panasonic KX-F880 - TONE, FLASH and REDIAL;PAUSE Buttons

37
Advanced
Operations
TONE, FLASH and REDIAL/PAUSE buttons
TONE button
2 3
4 5 6
7 8 9
0
1
FLASH
REDIAL/PAUSE
TONE
DIGITAL SP-PHONE
The TONE ( ) button is used for rotary pulse dial
services and allows you to temporarily change from pulse
to tone mode during a dialing operation.
When you hang up, the unit will automatically return to
the pulse mode.
1. Lift the handset or press .
DIGITAL SP-PHONE
FLASH button
The FLASH button functions as the hookswitch on a
regular phone. If you misdial or dial another phone
number, press the FLASH button firmly.
The FLASH button also allows you to use special
features of a host exchange (if connected) or local
telephone company services such as call waiting. For
further details, contact your local telephone company.
Note:
●
TONE, FLASH and PAUSE can be stored
into a phone number for automatic dialing.
Redialing the last number dialed
If the REDIAL/PAUSE button is pressed immediately after a dial tone is obtained, the last number dialed will
be redialed.
2. Press .
●
If the line is busy when using the button, the unit will automatically redial the
number up to 14 times.
DIGITAL SP-PHONE
REDIAL/PAUSE
Entering pauses
If the REDIAL/PAUSE button is pressed during dialing, a pause will be inserted.
Example-1: When your unit is connected to a host exchange, insert a pause to get an outside line.
9 PAUSE
Line access code
Phone number
Example-2: If transmission errors occur when making an overseas transmission, add two pauses at the end
of the phone number.
International
access code
Country
code
PAUSE PAUSE
Phone
number