Panasonic KX-FHD331

Connections and Setup
17
For Fax Advantage assistance, call 1-800-435-7329.
How to set up
1
Set the fax machine to FAX ONLY mode by
pressing
{
{{
{
RECEIVE MODE
}
}}
}
until the
following is displayed.
L
The display will show the number of
rings before the fax machine answers a
call in FAX ONLY mode.
2
Press
{
{{
{+
++
+}
}}
}
or
{
{{
{-
--
-}
}}
}
to change the ring
setting to 5 and press
{
{{
{
SET
}
}}
}
.
3
Turn on your answering machine.
4
Adjust a ring setting of the answering
machine less than 4.
L
This will allow the answering machine to
answer the call first.
How to receive calls
At first your answering machine will pick up the
call.
L
If the call is a phone call, the answering
machine will record voice message
automatically.
L
If a fax calling tone is detected, the answering
machine will be disconnected and the call will
be switched to the fax machine. The fax
machine will receive a fax automatically.
If the answering machine is turned off
The fax machine will ring 5 times and receive a
fax automatically.
With the fax machine
1. When the fax machine rings, lift the handset
of the fax machine.
2. When document reception is required, a fax
calling tone (slow beep) is heard, or no sound
is heard, press
{
{{
{
FAX/START
}
}}
}
.
3. Replace the handset.
L
The fax machine will start reception.
With an extension telephone
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When document reception is required, a fax
calling tone (slow beep) is heard, or no sound
is heard, press
{
{{
{*
**
*}
}}
}{
{{
{#
##
#}
}}
}{
{{
{
9
}
}}
}
(pre-selected fax
activation code) firmly.
3. Replace the handset.
L
The fax machine will start reception.
Note:
L
You can change the fax activation code in
feature #41 (page 62).
{SET}
{FAX/START}
{+}{-}
{RECEIVE MODE}
FAX
TEL
FAX ONLY MODE
3 RINGS