1. Introduction and Installation
14
For Fax Advantage assistance, call 1-800-435-7329.
1.6 Paper tray and paper
tray cover
1 Insert the paper tray (1) into the slot (2) on
the back of the unit.
2 Pull the tension plate forward (1) and attach
the paper tray cover (2), then push the
tension plate back (3).
Note:
L Do not place the unit in an area where the
paper tray may be obstructed (i.e., by a wall,
etc.).
L Keep this surface (4) away from walls etc.
more than 50 mm (1
31
/
32
") to let the unit cool
down.
To remove the paper tray
Pull the paper tray forward in the direction of the
arrow.
When you use legal paper, do not attach the
paper tray cover.
2
1
1
2
4
3
FL611-PFQX2072ZA-en.book Page 14 Thursday, December 21, 2006 11:10 AM
To Next Page
Loading...
