5. Distinctive Ring
45
5.4 Programming the ring
pattern assigned for fax
L Keep the front cover page open for button
locations.
1 Set feature #31 to “ON” (page 44).
2 Press {MENU}.
3 Press {#}, then {3}{2}.
4 Press {A} or {B} repeatedly to select the
ring pattern assigned for fax.
“A”: Standard ring (one long ring)
“B”: Double ring (two short rings)
“C”: Triple ring (short-long-short-rings)
“D”: Other triple ring (short-short-long rings)
“B-D” (default): The fax will respond to calls
with any of ring tone patterns “B”, “C” and
“D”
5 Press {SET}.
6 Press {MENU} to exit.
Other triple ring (short-
short-long rings)
“D”
1st ring 2nd ring
Ring pattern Settings in
feature #32
FL611-PFQX2072ZA-en.book Page 45 Thursday, December 21, 2006 11:10 AM
To Next Page
Loading...
