EasyManua.ls Logo

Panasonic KX-FPG376

Panasonic KX-FPG376
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7. Answering Machine
57
2. Press {A} or {B} repeatedly to select
ERASE.
3. Press {SET}.
L Your mailbox greeting message will be
erased.
4. Press {MENU}.
7.8 Listening to recorded
mailbox messages using
the base unit
L Keep the front cover page open for button
locations.
1 Press {>} 2 times.
2 Press {A} or {B} repeatedly to display the
desired mailbox number.
3 Press {PLAY MESSAGES}.
If you have programmed your mailbox
password, enter it.
L Only the new recorded messages will be
played.
L If there are no new messages, the unit
will play back all the recorded messages.
4 Press {STOP} to end the operation.
Note:
L See the following topics on page 52 for
details on features that can be used during
playback.
To repeat a message
To skip a message
To stop playback temporarily
To change the playback speed
To erase a specific message
To record a memo message into a mailbox
1. Press {>} 2 times.
2. Press {A} or {B} repeatedly to display the
desired mailbox number.
3. Press {RECORD}.
L A long beep will sound.
4. Speak clearly about 20 cm (8 inches) away
from the microphone.
5. When finished recording, press {STOP}.
To erase all messages in a mailbox
1. Press {>} 2 times.
2. Press {A} or {B} repeatedly to display the
desired mailbox number.
3. Press {ERASE}.
4. Press {SET}.
7.9 Listening to recorded
mailbox messages using
the handset
L Keep the front cover page open for button
locations.
1 Press {PLAYBACK}.
2 For mailbox 1:
Press {*}{1}.
For mailbox 2:
Press {*}{2}.
3 If you have programmed your mailbox
password, enter it.
L The voice guide will tell you the number of
new messages and they will be played
automatically.
To repeat only the new messages:
Press {4}.
To listen to all the messages:
Press {5}.
4 Press {OFF} to end the operation.
Note:
L See the following topics on page 53 for
details on features that can be used during
playback.
To repeat a message
To skip a message
To erase a specific message
To erase all the messages
When there are no new recorded
messages.
When voice memory is full.
FPG376.book Page 57 Wednesday, July 30, 2003 6:28 PM

Table of Contents

Related product manuals