1.14.2.1. MAINTENANCE LIST
NO. OPERATION CHECK REMARKS
1 Document Path Remove any foreign matter such as paper. —
2 Rollers If the roller is dirty, clean it with a damp cloth then dry
thoroughly.
See MAINTENANCE (P.18)
3 Thermal Head If the thermal head is dirty, clean the printing surface
with a cloth moistened with denatured alcohol (alcohol
without water), then dry thoroughly.
See MAINTENANCE (P.18) and
DISASSEMBLY INSTRUCTIONS
(P.85).
4 Glass If the glass is dirty, clean the with a dry soft cloth. See MAINTENANCE (P.18)
5 Sensors Document sensor (PS1), Read position sensor (SW42),
Recording paper/cover open sensor (SW1),Jam sensor
(SW3)
See SENSOR SECTION (P.72).
and SENSORS AND SWITCHES
(P.119).
6 Abnormal, wear and tear or loose parts If the glass is dirty, clean them with a dry soft cloth. —
1.14.2.2. MAINTENANCE CYCLE
No. Item Cleaning Cycle Replacement
Cycle Procedure
1 Separation Roller
(Ref. No. 10)
3 months 7 years*
(100,000 documents)
See HOW TO REMOVE THE ROLLERS (P.92).
2 Separation Roller
(Ref. No. 12)
3 months 7 years*
(100,000 documents)
See HOW TO REMOVE THE ROLLERS (P.92).
3 Feed Rollers
(Ref. No. 7)
3 months 7 years*
(100,000 documents)
See HOW TO REMOVE THE ROLLERS (P.92).
4 Thermal Head
(Ref. No. 79)
3 months 7 years*
(100,000 documents)
See HOW TO REMOVE THE IMAGE SENSOR
(P.94).
17
KX-FT63BX / KX-FT63BX-W
To Next Page
Loading...
