Panasonic KX-FT984HK

3. Preparation
10
3.5 Date and time
You must set the date and time.
L The other party’s fax machine will print the date and
time on each page you send according to your unit’s
date and time setting.
L The accuracy of the clock is approximately ±60
seconds a month.
L If a power failure occurs, the date and time setting
may be lost. If the correct date and time is not
displayed after the power has been restored, set the
date and time again.
1 Press {MENU}.
SYSTEM SETUP
PRESS [()]
2 Press {<} or {>} repeatedly to display the following.
SET DATE & TIME
PRESS SET
3 Press {SET}.
L The cursor (|) will appear on the display.
D:|01/M:01/Y:08
TIME: 00:00
4 Enter the current date/month/year by selecting 2
digits for each.
Example: 10 August, 2008
Press {1}{0} {0}{8} {0}{8}.
D:10/M:08/Y:08
TIME: |00:00
5 Enter the current hour/minute by selecting 2 digits for
each. Press {*} repeatedly to select “AM”, “PM”, or
24-hour time entry.
L When neither “AM” nor “PM” are displayed, 24-
hour time entry is selected.
Example: 15:20 (24-hour time entry)
Press {1}{5} {2}{0}.
D:|10/M:08/Y:08
TIME: 15:20
6 Press {SET}.
L The next feature will be displayed.
7 Press {MENU}.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
3.6 Your logo
Your logo will be printed on the top of each page sent
from your unit.
The logo can be your name or the name of your
company.
1 Press {MENU}.
SYSTEM SETUP
PRESS [()]
2 Press {<} or {>} repeatedly to display the following.
YOUR LOGO
PRESS SET
3 Press {SET}.
L The cursor (|) will appear on the display.
LOGO=|
4 Enter your logo, up to 30 characters. See the
following character table for details.
5 Press {SET}.
L The next feature will be displayed.
6 Press {MENU}.
To select characters with the dial keypad
{<}{>}
{SET}
{MENU}
Keypad Characters
{1} Space # & ’ ( )
@ ,–./1
{2} ABC2
abc2
{3} DEF3
def 3
{STOP}
{<}{>}
{SET}
{MENU}
{FLASH}
FT982_984HK-PNQX1347ZA-OI-en.book Page 10 Friday, June 13, 2008 10:35 AM