Panasonic KX-HDV430 - Page 11

10. 5.3.22 SIP Settings
Add the following configuration parameter.
SIP_183_TALK_ENABLE
Value Format
Description
Value Range
Default Value
11. 5.3.27 SRTP Settings
Add the following configuration parameter.
DISPLAY_SRTP_CALL_ENABLE
Value Format
Description
Value Range
Default Value
12. 5.3.28 VQ Report by PUBLISH
Add the following configuration parameter.
VQREPORT_SEND_OPT_CODEC_ENABLE
Value Format
Description
Value Range
Default Value
VQREPORT_SEND_OPT_NW_CHANGE
Value Format
Description
Value Range
Default Value
BOOLEAN
Specifies whether the unit's sate is "Talking" or "Calling" when it receives a SIP
183 message.
・Y: Talking
・N: Calling
N
BOOLEAN
Selects whether an icon is displayed when the unit is using encrypted call mode
(SRTP).
・Y: Display an icon for encrypted calls
・N: Disable
N
INTEGER
Specifies whether to enable the sending of VQREPORT (SIP-PUBLISH) when
the codec is changed.
・Y: Send VQREPORT when a change of codec is detected
・N: Send VQREPORT at the end of a conversation
Specifies the number of consecutive times the MOS (Mean Opinion Score) value
may fall below the threshold value specified by either
ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARNING before
the phone sends VQREPORT.
The ALERT_REPORT_TRIGGER setting determines whether
ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARNING is
used as the threshold.
0–5
(The number of consecutive times. 0:Disable)
Note
If "2" is specified and the MOS value falls within the threshold
2 consecutive times, VQREPORT is sent.
BOOLEAN
0
N