Panasonic KX-HDV800

10
OBTAINING A NETWORK ADDRESS
Connecting to a network with DHCP
See “Check IP address” under “USING THE WEB INTERFACE” on page 8.
Connecting to a network with static IP addresses
You need the IP address, host name, domain, (MENU), gateway, DNS 1, and DNS 2.
The host name can be set freely. The domain and secondary DNS can be left blank.
Ö
Press (MENU) and select SETTINGS > ADVANCED (6,2).
Ö
Enter the PIN code.
L
The default code is 12345678.
Ö
Select NETWORK (2)
Ö
Select STATIC IP.
Ö
Enter values for the IP ADDRESS.
L
Enter three digits (begin with 0 if necessary), press OK, enter three digits, and
so on.
Ö
Enter HOST NAME
Default is KX-HDV800.
Ö
Enter DOMAIN
Ö
Enter NETMASK
Ö
Enter GATEWAY
Ö
Enter DNS 1
Ö
Enter DNS 2
The display shows DONE.
LOGIN
See “Login” under “USING THE WEB INTERFACE” on page 8.
INSTALLATION