R If more than 1 item named
“KX-HNC800_Panasonic” is
displayed, wait approx. 10
minutes and perform this
procedure from the
beginning.
6 Start the [Home Network]
app again.
7 If necessary, enter the
password required to connect
to your wireless router and
then tap [Next].
R The camera and your
mobile device connect to
your wireless router.
R If prompted, follow the
on-screen instructions and
connect your mobile device
to your wireless router, start
the app again, and then tap
[Add This Mobile Device].
R If you enter the wrong Wi-Fi
password, [Setup failed.] is
displayed and the camera’s
LED indicator lights. Repeat
the initial setup procedure
from the beginning.
8 When prompted, press the
MWi-Fi SETUPN button on the
camera.
R Your mobile device will be
registered to the camera.
9 When prompted, follow the
on-screen instructions and set
the password used to log in to
the camera while away from
ho
me.
10 When prompted, enter a
name for your mobile device
and then tap [OK].
R This setting allows you to
change the name assigned
to your device. It can help
you identify your mobile
device when performing
certain operations, such as
deregistering a mobile
device.
R The app’s home screen is
displayed when initial setup
is complete.
For assistance, visit www.panasonic.ca/english/support
19
Setup
To Next Page
Loading...
