9. Programmable Features
48
9 Programma ble FeaturesFeatures Summ ary
9.1 Programming
1 {MENU}
2 Press {#} and the 3-digit code.
3 Press the desired selection to display the desired
setting.
L This step may be slightly different depending on
the feature.
4 {SET}
5 Press {MENU} to exit.
To select features using the web browser (KX-
MB781, LAN connection only)
You can change features using the web browser instead
of the unit.
1. Start Multi-Function Station. i [Utilities] i
[Configuration Web Page]
L You can also access the unit by entering its IP
address on the web browser.
2. Select the desired category from the menu bar.
[Device Configuration]: features of the unit
[Network Configuration]: features of the network
3. Type “root” as the user name, then enter the
password (feature #155 on page 50) i [OK]
4. Select the desired feature tab at the top of the right
frame.
5. Change the settings or edit information.
L This step may be slightly different depending on
the feature.
6. [Submit]
L The new data will be transferred to the unit.
7. Close the web browser.
Note:
L The settings displayed in the web browser will be
updated by clicking [Reload].
{SET}
{MENU}
MB271-781-PFQX2722ZA-OI-en.book Page 48 Tuesday, May 22, 2007 5:20 PM
To Next Page
Loading...
