9. Programmable Features
51
Setting the default operation
mode timer
{#}{4}{6}{4}
(KX-MB781 only)
To set the timer before returning to the default operation mode (feature #463).
{0} “OFF”: Deactivates this feature.
{1} “30s”: 30 seconds
{2} “1min” (default): 1 minute
{3} “2min”: 2 minutes
{4} “5min”: 5 minutes
Setting toner save feature
{#}{4}{8}{2}
{0} “OFF” (default): Deactivates this feature.
{1} “ON”: The toner cartridge will last longer.
Note:
L This feature may lower the print quality by reducing toner consumption.
Feature/Code Selection
MB271-781-PFQX2722ZA-OI-en.book Page 51 Tuesday, May 22, 2007 5:20 PM
To Next Page
Loading...
