83 mm
100 mm
100 mm
83 mm
for
KX-NT511/KX-NT551/KX-NT553/KX-NT556
for KX-NT505
222 mm
One screw here
One screw at either point
One screw at either point
One screw here
WALL MOUNTING TEMPLATE
1. Drive the screws into the wall as indicated.
Note:
• If the KX-NT505 is mounted beside a
KX-NT553/KX-NT556, leave 222 mm
of space between the 2 screws
for the IP-PT and the 2 screws for the
KX-NT505, as indicated above.
This space is abbreviated in this
template and must be measured.
2. Hook the unit onto the screw heads.
To Previous Page
Loading...
