To Next Page
D
dwilsonSep 9, 2025
How to resolve double-spaced printouts on a Panasonic KX-P1121E Printer?
- KkbriggsSep 9, 2025
If your Panasonic Printer's printout is double-spaced, the Auto LF setting is likely ON. Set Auto LF to OFF to correct this.
How to resolve double-spaced printouts on a Panasonic KX-P1121E Printer?
If your Panasonic Printer's printout is double-spaced, the Auto LF setting is likely ON. Set Auto LF to OFF to correct this.
What does it mean when both FONT LEDs are blinking on my Panasonic Printer?
If both FONT LEDs are blinking on your Panasonic Printer immediately after powering it on, there is an electrical malfunction. Consult your dealer for assistance.
General| Type | Dot Matrix Printer |
|---|---|
| Print Width | 80 columns |
| Resolution | 240 x 216 DPI |
| Number of Pins | 24 |
| Interface | Parallel |
| Noise Level | 55 dB |
| Paper Path | friction feed |
Printer features overview.
Explains the manual structure and content.
Defines technical terms and lists registered trademarks.
Information on the product's energy efficiency rating.
FCC compliance details for US users.
Contact information for product support.
General safety warnings and advice for users.
Guidelines for safe electrical connections.
Crucial safety rules for operating the printer.
Installation and environmental safety precautions.
Additional safety rules for operation.
Procedure for replacing the fuse in the power plug.
Safe placement, usage, and ribbon handling.
Explanation of warning labels on the printer.
Checking contents and basic setup steps.
Identification of printer components from the front.
Identification of printer components from the rear.
Explanation of control panel buttons and indicators.
Step-by-step guide for software installation.
Connecting the printer via USB or parallel cable.
Connecting the printer to an AC power outlet.
Procedure for mounting the ribbon cassette.
Procedure for removing the ribbon cassette.
Loading fanfold paper using the tractor feed.
Continuation of fanfold paper loading.
Final steps for fanfold paper setup.
Loading single sheets or envelopes.
Final steps for single sheet loading.
How to perform the printer's self-test function.
Guide to the printer configuration software.
Explanation of software interface elements.
Steps to remove the printer software.
How to enter the printer's setup mode.
Summary of available control panel settings.
Procedure to restore factory default settings.
How to print the current printer configuration.
How to choose different printer fonts.
Adjusting paper using control panel switches.
Routine cleaning and care for the printer.
Re-inking the ribbon cassette for better print.
Diagnosing and fixing typical printer issues.
Resolving print quality problems like spacing.
Detailed technical specifications of the printer.
Additional technical data and measurements.
Guidelines for acceptable paper types and sizes.
Defines printable zones on fanfold paper.
Defines printable zones for single sheets.
Details about available consumables like ribbons.
WEEE disposal instructions for consumers.
WEEE disposal instructions for businesses.
