To Next Page
M
Martha Ramirez DVMSep 10, 2025
What causes wrong character set prints on Panasonic Printer?
- AAmy MooreSep 12, 2025
Wrong character set prints on Panasonic Printer are caused by selecting wrong Character Set. Set the Character Set as required.
What causes wrong character set prints on Panasonic Printer?
Wrong character set prints on Panasonic Printer are caused by selecting wrong Character Set. Set the Character Set as required.
Why is my Panasonic KX-P1131E Printer power on but not printing?
If the power is on but your Panasonic printer refuses to print, there are several potential causes: * The printer might not be ON LINE. Try pressing the ON LINE switch. * The interface cable may not be properly connected. Ensure it is securely connected. * The printer could be out of paper. Install new paper. * The printhead may have become overheated. Allow the printhead some time to cool down; the printer will automatically resume printing.
How to fix Panasonic printer when carriage stops moving and all indicators are blinking?
If the carriage stops moving and all indicators start blinking on your Panasonic printer, it indicates that the path of the printhead is blocked. Clear the obstruction, turn the power off, and then turn it back on to resume printing.
What causes ink smears on my Panasonic KX-P1131E?
Ink smears from the Panasonic Printer may be due to the head gap lever not being in the correct position. To resolve this, move the lever toward the position "6" until the ink no longer smears.
Why is the printout faint on my Panasonic KX-P1131E Printer?
A faint printout on your Panasonic Printer is likely caused by the head gap lever not being in the proper position. Set the lever to the correct position.
What to do if Panasonic Printer printhead moves but no printing occurs?
If the printhead moves, but there is no printing from your Panasonic Printer, the issue could be due to: * The ribbon cassette not being installed correctly. Try re-inserting the ribbon cassette. * The head gap lever not being in the proper position. Set the lever to the correct position.
Why Panasonic Printer does not print with serial interface?
When using a serial interface, if the Panasonic printer does not print or data loss occurs, it could be due to: * Baud rate, Parity, Protocol, or Data length not matching the computer. Set Baud rate, Parity, Protocol, and Data length to match the computer. * A USB cable being connected. When a USB cable is connected, the serial interface does not operate. Disconnect the USB cable.
How to resolve Panasonic Printer cannot load single sheet through the top?
If your Panasonic Printer cannot load a single sheet through the top, the paper feed selector is set to " ". Set the paper feed selector to " ".
Why does my Panasonic KX-P1131E Printer keep printing on the same line?
If your Panasonic Printer keeps printing on the same line, it means that the computer is not sending a LF command. Set Auto LF to ON.
How to resolve unexpected characters appearing in Panasonic Printer printing?
Unexpected characters appearing in printing from your Panasonic Printer are likely due to the emulation being set incorrectly. Check the printer driver of your software package and set the emulation accordingly.
General description and key highlights of the printer.
Explanation of the included manuals.
Definitions of terms and proprietary names.
US regulatory information and technical assistance contacts.
Covers power, ground connection, and operating safeguards.
Safe placement and operating conditions.
Verifying contents and preparing for first use.
Visual guide to printer components.
Guide to computer software installation.
Procedures for interface connections.
Connecting power, installing ribbon, and loading paper.
Performing a diagnostic test.
Configuring printer settings via the software.
Accessing reference documents and removing software.
Selecting fonts and character pitches.
Using High Speed, LF/FF, and Tear Off switches.
Top of Form, Paper Parking, Initial Setup.
Serial interface configuration and resetting.
Recommended care for longevity.
Identifying and resolving printer problems.
Detailed technical data of the printer.
Guidelines for paper compatibility and print layout.
Details on consumables.
General description and key highlights of the printer.
Explanation of the included manuals.
Definitions of terms and proprietary names.
US regulatory information and technical assistance contacts.
Covers power, ground connection, and operating safeguards.
Safe placement and operating conditions.
Verifying contents and preparing for first use.
Visual guide to printer components.
Guide to computer software installation.
Procedures for interface connections.
Connecting power, installing ribbon, and loading paper.
Performing a diagnostic test.
Configuring printer settings via the software.
Accessing reference documents and removing software.
Selecting fonts and character pitches.
Using High Speed, LF/FF, and Tear Off switches.
Top of Form, Paper Parking, Initial Setup.
Serial interface configuration and resetting.
Recommended care for longevity.
Identifying and resolving printer problems.
Detailed technical data of the printer.
Guidelines for paper compatibility and print layout.
Details on consumables.
General| Type | Dot Matrix Printer |
|---|---|
| Print Width | 80 columns |
| Interface | Centronics parallel |
| Print Technology | Dot Matrix |
| Paper Size | A4 |
| Number of Pins | 24 |
| Printing Method | Impact |
| Paper Handling | Continuous paper, Cut sheet |
| Noise Level | 55 dB |
