This Manual: http://www.manuallib.com/file/2525964
Epson LQ-2S00 Mode Commands
ALTERNATE CHARACTER SET:
Selects alternate character set.
Name:
Dec.:
Hex.:
Comment:
ESC+t+n
27,116,n
1B, 74, n
(n=0,1)
eThe following values of n can be used.
n=O: Italic
n=1:
Graphic Character Set
a-PIN STANDARD DENSITY GRAPHICS:
Sets standard density graphics mode [480 dots per line/60 dots per inch
(25.4 mm)].
Name:
Dec.
Hex.:
ESC+K+n,+n2+Data
27,75,
n"
n2,
Data
1
B,
4B,
n"
n2,
Data
a-PIN DOUBLE DENSITY GRAPHICS:
Sets double density graphics mode [960 dots per line/120 dots per inch
(25.4 mm)].
Name:
Dec.
Hex.:
ESC+L+n,+n2+Data
27,76,
n"
n2,
Data
1
B,
4C,
n"
n2,
Data
a-PIN DOUBLE SPEED/DOUBLE DENSITY GRAPHICS:
Sets double speed, double density graphics mode [960 dots per
Iinel120 dots per inch (25.4 mm)].
Name:
Dec.:
Hex.:
Comment:
ESC+
Y+n,+n2+Data
27,89,
n"
n2,
Data
1
B,
59,
n"
n2,
Data
eHorizontally adjacent dots cannot
be
printed.
6-14
To Next Page
