This Manual: http://www.manuallib.com/file/2525964
Epson LQ-2S00 Mode Commands
n/360 INCH PAPER FEED:
Sets programmable paper feed amount to n/360 inch.
Name:
Dec.:
Hex.:
Comment:
ESC+++n
27, 43, n
1B, 2B, n
FS+3+n
28, 51, n
1C, 33, n
-n/360
inch paper feed is valid for
0;:;;
n;:;;
255.
LINE FEED (LF):
••
Causes data in buffer to be printed and then excutes single line feed.
Name:
Dec.:
Hex.:
Comments:
IF
10
OA
-When the new line position falls within the perforation skip area, the
paper advances to the next· top of form position if skip over perforation
is turned on.
-If
there is no data, "space" data (ASCII 32), or blanks between HT
print positions
in
the buffer,
IF
feeds the paper 1 line.
-The
amout of spacing generated by
IF
is a function of the paper feed
amount setting.
elF
code releases single-line double width printing set by SO or
ESC+SO.
6-18
To Next Page
Loading...
