This Manual: http://www.manuallib.com/file/2525964
Epson LQ-2500 Mode Commands
BACKSPACE:
Prints data
in
buffer and backspaces one space before printing next
character.
Name:
Dec.:
Hex.:
Comments:
BS
8
08
-Since BS backspaces the width of a character, the backspacing
amount will depend upon the character mode set when the BS code
was received.
-This
command is ignored
in
the word processing mode (ESC+a+1,
.;
ESC+a+2
or
ESC+a+3).
CARRIAGE RETURN:
Prints ali data
in
buffer and d
es
ig
nat
es
that the
ne
xt line starts at the left
margin.
Name:
Dec.:
Hex.:
Comments:
CR
13
00
-Certain computers issue
an
automatic line feed with a carriage return.
Check
your computer manu
al
for details.
-When
automatic LF
is
set to
ON
in the Initial Setup mode, the paper
is
fed automatically
(a
LF
is executed automatically) whenever a
CR
code is executed.
eCR code releases single line double width printing set by SO or
ESC+SO.
HOME PRINT HEAD:
Causes print head to return to its home position.
Name:
Dec.:
Hex.:
ESC+<
27,60
18,3C
6-26
To Next Page
Loading...
