Panasonic KX-T7135 - Page 7

@ INTERCOM Button and
Indicator:
Used for making or receiving
an intercom call.
© CONFERENCE Button and
Indicator:
Used for speaking with three
parties at the same time.
®© REDIAL Button:
Redials the last number
dialed.
@ FLASH Button:
Used for sending the hook
flash signal to the CO line.
© LCD (Liquid Crystal Display)
with back light.
© Programmable Feature Buttons:
Dial or access the system
features with one touch.
®© Flexible CO Line Buttons and
Indicators’:
Used for dialing via CO line,
Direct Station Selection, or
Programmable Feature
buttons.
-® Flexible Message Waiting
Button and Indicator’:
Used for Message Waiting,
Direct Station Selection, or
Programmable Feature button.
© SAVE Button:
Used for temporarily storing the
number in the redial memory.
TRANSFER Button:
Transfers a call to any
extension.
D PAUSE Button:
Inserts a pause between the
access number and the -
phone number.
@ AUTO DIAL/STORE Button
and Indicator:
Used for dialing the system
speed dialing/For storing
functions into memory.
@ AUTO ANSWER/MUTE Button
and Indicator:
Used for answering an
intercom call automatically/
For muting your voice in
hands-free mode.
¢) SP-PHONE Button and
Indicator:
Used for making or receiving
a call without using the
handset.
®© HOLD Button:
Places a call on hold.
FWD/DND Button and Indicator:
Sets or cancels the Call
Forwarding/Do Not Disturb
features.
*These functions are limited to the
specified EMSS Control Units.
Refer to the Installation manual.