29
Installing the Card Holder
The KX-T7420 and KX-T7425 are equipped with a card holder with memory station
card. Follow the instructions below to install the card holder to the unit.
1 Place the card holder edges so that
they can be inserted under the
slide rails on the unit.
2 While pushing on the areas
marked “PUSH”, insert the edges
of the holder under the slide rails
and then slide in the direction of
arrow .
Remove the card holder:
Push the card holder in the direction
of arrow . Then, while pressing on
the tab, pull the top of the holder in
the direction of arrow .
To Next Page
Loading...
