4-120 DPT Features
S 4.2 DPT Features
System Speed Dialing
Allows you to make a call using speed dial numbers programmed previously. This
system supports one hundred speed dial numbers which are available to all extension
users.
1. Lift the handset or press the SP-PHONE/MONITOR button.
• The INTERCOM indicator light turns green.
2. Press the AUTO DIAL/STORE button.
• The AUTO DIAL/STORE indicator lights.
• You do not hear a tone.
3. Dial the System Speed Dial number (00 through 99).
• The AUTO DIAL/STORE indicator light turns off.
Conditions
• System Speed Dial numbers must be stored either through the User (Manager) or
System Programming.
• “Speed Dialing”, “One-Touch Dialing”, “Redial, Last Number/Saved Number” and
manual dialing can be used together.
• Continuous use of a speed dial number is possible, if the number is divided when
stored.
<Example>
If the number is divided and stored in System Speed Dial numbers 01 and 02;
Press: [AUTO DIAL/STORE] [0] [1] [AUTO DIAL/STORE] [0] [2]
• The dialed number appears on the display.
• You may press a CO button to select a desired outside line before pressing the AUTO
DIAL/STORE button.
• It is possible to cancel toll restriction with this feature (Toll Restriction Override for
System Speed Dialing). In this case, System Programming is necessary.
• With the KX-T7431, KX-T7433, KX-T7436 and KX-T7235, you can execute this
feature using the display operation.
1
3
System Speed Dial number
2
To Next Page
Loading...
Need help?
General
