10
Note: The Doorphone can be installed directly into a wall recess without
using the interface bracket. Use the mounting template on page 15 for
drilling positions. Use the supplied 25 mm (1") screws to fix to the wall
(see Figure 11).
Figure 10 Figure 11
5. Feed the wires through the center of the interface bracket and
connect the wires to the Doorphone Module.
6. Attach the front of the Doorphone to the bracket using the supplied
10 mm ( / ") M3 threaded screws.
3
8
8
1
Note: To ensure the correct fitting of the Doorphone, please do not allow
the screw head to protrude more than 3mm ( / ") beyond the interface
bracket.
To Next Page
Loading...
