Panasonic KX-TC1743B - Page 59

For Call Waiting Service Users
Press [FLASH/CALL WAIT/PLAYBACK) or [FLASH/CALL WAIT) if you hear
a call-waiting tone while talking.
•The first call is put on hold and y ou can answer the second call.
•To return to the first caller, press (FLASH/CALL WAIT/PLAYBACK) or
(FLASH/CALL WAIT) again.
•The call waiting service cannot be used when:
—the answering system is recording someone's message, or
—a parallel connected telephone is in use.
•If this function does not operate properly, consult your telephone company for
details.
Call Waiting Caller ID Feature
Call Waiting Caller ID Feature allows your unit
to display the second caller’s information. After
you hear a call-waiting tone while talking, the
unit will display the caller’s name with the phone
number and “- waiting-
• Please contact your telephone company for details and availability in your area.
BROWN,NANCY
1-000-222-3333
-Waiting-
How to Use the PAUSE Button
(For Analog PBX Line/Long Distance Service Users)
We recommend you press f R E D IAL/PAUSE/FUNCTiONl or [REDIAL/PAUSE I
if a pause is required for dialing with a PBX or to access a long distance
service.
Ex. Line access number ( 9 ) (PBX)
@) ■ * [REDtAL/PAUSE/FUNCTIQN) or I REDIAL/PAUSE) *
Phone number
• Pressing 1 RED IAL/PAUSE/F UNCTION) or [ REDIAL/P aTJSE) once creates a
3.5 second pause. This prevents misdialing when you redial or dial a stored
number.
• Pressing [ REDIAL/P AUSE/FUNCTION) or iREDIAL/PAUSE 1 more than once
increases the length of the pause between numbers.