Panasonic KX-TC1743B - Page 60

A Special Features
FLASH Button
Pressing (FLASH/CALL WAIT/PLAYBACK) or I FLASH/CALL WAIT) allows
you to use special features of your host PBX such as transferring an
extension call or accessing special telephone services (optional) such as
call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)”. Your phone comes from the factory set to
“700 ms”.
Make sure the unit is in the standby mode.
Press ( R E D I AL/PAUSE/FUNCTiON) .
Press (3 or Q repeatedly until the arrow
points to “Program”.
Press EDIT Q0.
Press 0 or (X) repeatedly until the arrow
points to “Set flash time”.
Press EDIT[ ► ) .
Press ( ▼ ) or (X) repeatedly until the
desired time is displayed.
Press EDIT [ ► ) (Save key).
•A beep sounds.
•To return to the standby mode, press (OFF) .
LCD contrast
► S e t flash time
Set line mode
Flash time
:700ms
▼ A
► = S a ve
Flash time
:110ms
Ringer volume
► P r ogram
Save directory
1
2
3
4
5
6
7
•You can exit the programming mode any time by pressing (OFFi .
• If you are connected via a PBX, a longer flash time may be necessary to use
PBX functions (transferring a call etc.). Consult your PBX supplier for the correct
setting.
60