74
Answering System
Greeting Message
Recording Your Own Greeting Message
Selecting the Caller’s Recording Time
• The factory preset is “No Limit”.
1
Press JOYSTICK
(or move).
2
Select “ TAM
Operation”.
3
Select “Record”.
4
Select “Record
OGM”.
5
Record Greeting
Message.
20 cm away from the
Mic.
6
Press JOYSTICK to
finish recording, then the
recorded message is
played back.
Follow steps 1 to 2 shown above, then:
3
Select “Setting
TAM”.
4
Select “Msg Rec
Time”.
5
Select “1 Minute” or
“No Limit” (up to
30 minutes) or
“Greeting Only” (no
incoming messages will
be recorded).
515NL_e.book Page 74 Tuesday, July 15, 2003 1:53 PM
To Next Page
Loading...
