Panasonic KX-TCD515NL - Page 86

80
Answering System
Answering System Direct Command
You can operate the answering system by pressing dialling buttons as direct
command.
*1 This function is available only during an incoming/memo message playback.
1
Press JOYSTICK
(or move).
2
Select “ TAM
Operation”.
3
Select “Play New Msg.”
or “Play All Msg.”.
Follow steps 1 to 3 shown above, then:
Press To repeat a message.
Press To skip a message.
Press To stop a message playback.
Press To delete one incoming/memo message. *1
Press To delete all incoming/memo messages.
Follow steps 1 to 2 shown above, then:
Press To enter the answering system setting menu.
Press To playback new incoming/memo message(s).
Press To playback all incoming/memo messages.
Press To playback a greeting message.
Press To record a memo message.
Press To record your own greeting message.
Press To set the answering system ON.
Press To stop playing back or recording a message.
Press To set the answering system OFF.
Press To delete your own recorded greeting message.
1
2
9
9
4
4
5
3
3
4
4
5
6
6
7
7
4
4
7
7
6
6
8
8
9
9
0
0
6
6
515NL_e.book Page 80 Tuesday, July 15, 2003 1:53 PM