Panasonic KX-TG1070FX

15
Caller ID Service
Using Caller ID service
Important:
• This unit is Caller ID compatible. To
use Caller ID features (such as
displaying caller phone numbers), you
must subscribe to Caller ID service.
Consult your service provider/
telephone company for details.
Caller ID features
When new calls have been received, the
display will show the number of new
calls. If a call is not answered, phone
numbers of the last 10 different callers
will be listed in the call log and “-CALL-” is
shown on the display.
• The following will not be left in the call
log:
- “-O-” (Out of area):The caller dialled
from an area which does not provide
Caller ID service.
- “-P-” (Private caller):The caller
requested not to send caller
information.
- Caller information for the answered
calls.
Checking call log
[
/CID] > Press [ ] or [ ] to check the
numbers.
• If the date and time is set or caller
information includes the date and
time, you can display it by pressing [#].
If you want to return to the phone
number, press [#] again.
Note:
• Press [ ] to start calling the selected
number.
• If a call number in the log has never
been read, “n ” shows prior to the
number.
• If the number is more than 10-digit
long, only the last 10 digits will be
displayed preceded by a “_”.
Deleting a number in the call log
1 [
/CID] > Press [ ] or [ ] to check
the numbers.
2 [C] to delete the selected number.
Deleting the whole call log
1 [
/OK] > [0] > [ /CID]
2 [
/OK] to confirm deletion.