6
Preparation
Connections
Base unit
1. To telephone network
2. 220-240 V, 50 Hz
Note:
• Use only the included AC adaptor and
telephone line cord.
• Connect the AC adaptor securely to
the AC outlet.
• To mount the base unit to the wall, see
page 23.
Charger
KX-TG1072
Battery installation
Important:
• Wipe the battery ends (+,–) with a dry
cloth.
• Install the batteries without touching
the battery ends (+,–) or the unit
contacts.
1 Press the notch of the handset cover
firmly and slide it in the direction of the
arrow.
2 Insert the batteries negative (–)
terminal first. Close the handset cover.
Note:
• Use only the included rechargeable
batteries.
Hook
1
1. 220-240 V, 50 Hz
Note:
• Never install telephone wiring during a
lightning storm.
• Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
Location
For maximum distance and noise-free
operation, place your base unit:
• Away from electrical appliances such
as TVs, radios, personal computers
or other phones.
• In a convenient, high and central
location.
To Next Page
Loading...
