Caller’s recording time
You can change the maximum message recording
time allowed for each caller. The default setting is
“3 min”.
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1 MMENUN#305
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Selecting “Greeting only”
You can select “Greeting only” which sets the
unit to announce a greeting message to callers but
not record messages.
Select “Greeting only” in step 2 on “Caller’s
recording time”, page 46.
Note:
R When you select “Greeting only”:
– If you do not record your own message, the
unit will play the pre-recorded greeting-only
message asking callers to call again later.
– If you use your own message, record the
greeting-only message asking callers to call
again later (page 40).
46
For assistance, visit www.panasonic.ca/english/support
Answering System
To Next Page
Loading...
