Liquid damage
Problem Cause/solution
Liquid or other form of moisture
has entered the handset/base
unit.
R Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorized service centre.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
54
For assistance, visit www.panasonic.ca/english/support
Useful Information
To Next Page
Loading...
