To dial after confirming the entered number
1
Dial a phone number.
•If you misdial, press (CLEAR). One digit is
erased. Dial the correct phone number.
2
Press .
OR
To have a hands-free phone conversation,
press , and when the other party
answers, talk into the microphone.
•After a few seconds, the display will show the
length of the call and the battery strength.
3
To hang up, press (OFF) or place the
handset on the base unit.
To redial using the redial list
(Memory Redial)
The last 5 phone numbers dialed with the handset are stored in the redial
list.
1. Press (REDIAL/PAUSE).
•The last number dialed is displayed.
2. Scroll to the desired number by pressing Ö
or Ñ.
•You can also scroll through the list by pressing
(REDIAL/PAUSE).
•To exit the list, press
(OFF).
3. Press or .
•To erase an item, repeat steps 1 and 2, and press (CLEAR).
•If “No items stored” is displayed, the list is empty.
To put a call on hold
Press (HOLD).
•“Hold” is displayed.
•The IN USE/CHARGE/HOLD indicator on the base
unit flashes.
•If you put a call on hold for more than 6 minutes, an alarm tone will sound. The
call will be disconnected after a total of 10 minutes.
To release the hold
Lift the handset, or press or .
•If another phone is connected on the same line (p. 52), you can also release the
hold by lifting its handset.
23
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
Talk
3334444
Talk
00-00-00
3334444
Ex. was pressed.
Hold
00-00-08
333-4444
GF
Redial list
To Next Page
Loading...
